|
游客，本帖隐藏的内容需要积分高于 1 才可浏览，您当前积分为 0
资源信息：
[已通过安全检测]卡巴斯基反病毒Personal Pro 5.0.390 病毒库:2005.11.21
[已通过安装测试]WinXP+SP2+VMware
软件版权归原作者及原软件公司所有，如果你喜欢，请购买正版软件
共享服务时间:每天:8点至23点
共享服务器:R2服务器
软件名称：Mac OS X Tiger
版本号： 10.4.3 破解版
软件语言： 英文/简体中文
软件介绍：
11.28日又发布了1.1a补丁包，这下以前不能安装的8XX板也可以安装了。
地址如下：http://www7.rapidupload.com/file.php?filepath=1416
用这个一个补丁包给UlraISO转换后的ISO文件打一次补丁后就可以安装了！
大家有什么疑问，可以在PearPC中文站来，这里有许多网友安装成功的经验可供参考!
以下是11.26日最新官方修补说明：
Maxxuss DVD/ISO Patcher for 10.4.3 x86 (8F1099)
This is the second release (v1.1) of my DVD/ISO Patcher. It will modify an ISO image of the Mac OS 10.4.3 x86 (Build 8F1099) DTK DVD. The result is a fully working ISO from which you can install Mac OS X on your system.
The minimum requirement for running Mac OS X 10.4.3 x86 is a CPU with SSE2 and PAE. See also my discussion on these confusing CPU features.
Contents of the DVD/ISO Patcher
The Patcher puts all the required patches for 10.4.3 and also some kernel extensions for better hardware support on the ISO. Here's the complete list:
Maxxuss Boot Loader Patch (applied to ISO)
Maxxuss Mach Kernel Patch v0.3 and, for non-NX/XD CPUs, v0.3b
Maxxuss Anti-TPM Patch v1.0: oah750, oah750d
Kernel Extensions:
ApplePS2Controller (keyboard, mouse, trackpad),
AppleGenericPCATA.kext,
AppleOnboardPCATA.kext (with NForce deviceIDs),
AppleAC97Audio.kext (with NForce deviceIDs) and Maxxuss VMWare Sound Driver,
Maxxuss VMWare Network Driver.
removes AppleTPMACPI and AppleFPMemDriver kernel extensions.
Most of these files are also contained in an installation package "MaxxussPatches.pkg" on the ISO , which is automatically installed during the Mac OS X installation procedure. So you do not have to do anything special before, during and afterwards.
Changelog
Added since v1.0: Kernel v0.3b (was v1.0_addon), broader NForce device support, Audio drivers.
Downloads
The download of the DVD/ISO Patcher v1.1 is available from these locations as a ZIP archive (~ 45 MB):
www.rapidshare.de
www.rapidupload.com
How to use the Patcher
Preparation of the ISO Image file
Convert the DMG to an ISO file. I used UltraISO v7.6.1125 (ed2k link) and clicked on "Tools -> Convert to Standard ISO".
The MD5 (output of md5sum) of my DMG image file is: daf72f000bd860360ae494d915058af6 ("10.4.3_8f1099_for_dtk_userdvd.dmg").
The MD5 of my ISO image file is: e7d86fefb4b5155890addbf7fae19398
(If yours differ, you still may give it a try as the patcher does not validate and would proceed even in case of different binaries).
Patching the ISO Image file
The Patcher file (.ppf) serves as an input for the PPF 3.0 patcher software. It is available for Windows, Linux and Mac OS X. For Mac, to prevent it from crashing, double-click the .ppf file (which starts PPF), then select ISO image and apply patch. There's also the command-line version and a Java version available.
Booting and Installing
The patched ISO image contains three different Mach Kernels. You need to boot the patched DVD/ISO with the right kernel for your CPU needs:
mach_kernel (default): same as mach_kernel.nonx,
mach_kernel.sse2: supports SSE2 CPUs, requires NX/XD CPU support,
mach_kernel.nonx: supports SSE2 CPUs, does not require NX/XD CPU support,
mach_kernel.orig: the original kernel, for use with SSE3 CPUs with NX/XD support.
If you're fine with the default kernel, there is nothing to do and can simply hit Return at the Darwin Boot prompt. But if you require for example "mach_kernel.sse2", then you should enter "mach_kernel.sse2".
Problems and Workarounds
Some users have noted they get the error "Cannot load /com.apple.Boot.plist" after the boot prompt. This should help: Enter the boot promt and hit Return or a boot option.
If have made it past the boot promt and the system loads for a while but then hangs and nothing seems to happen anymore, don't give up! Just wait a while, up to 5 minutes. It's often seen (usually in VMWare) that the DVD drive virtualization causes these stalls, but the system resumes after a while.
If nothing helps, use boot options "-v -s" (additionally to your kernel selection) and see what is printed to the console. The "-s" option should get you into single-user mode. If you can get here, press Ctrl-D to resume the boot procedure. If nothing works, make a note of the console output and visit the forums.
Booting from the Installed Mac OS X Volume
After the installation has succeeded, you can now boot your new system. As before, there are several kernels available for your CPU needs (see the list above: mach_kernel, mach_kernel.sse2, mach_kernel.nonx and mach_kernel.orig.
To select your kernel of choice, you have several options:
Enter the name at the boot promt, e.g. "mach_kernel.nonx",
As root or with "sudo" copy the kernel file to "mach_kernel", e.g. "cp /mach_kernel.sse2 /mach_kernel",
As root or with "sudo" edit the file "com.apple.Boot.plist" in the folder "/Library/Preferences/SystemConfiguration".
Notes
VMWare
If you boot Mac OS X 10.4.3 in VMWare please note:
Set "paevm=true" in your .vmx configuration file
Mount the ISO using Daemon Tools etc., not with the VMWare CD/DVD drive emulation.
If you tried everything but can't boot it NATIVE without a panic
User xtraa has found a great way to install Mac OS X 10.4.3 for native use. He uses VMWare to install to a physical partition and then boot natively from it. It seems to work for a lot of users. Make sure you check out his guide.
Something missing?
Some kernel extensions might be missing for your optimal hardware support. You should be able to put them into your working system afterwards (just copy to the /System/Library/Extensions folder). If something is missing, please send me a private message (PM) at the Mac OS X86 forum. Please also send me a PM if you can provide something, e.g. new kernel extensions or modifications to existing ones to support a broader range of device variants.
Here's a list of Maxxuss releases not included in the DVD/ISO Patcher v1.1. However, I've prepared them for easy installation:
SSE3->SSE2 Additional Patch for 10.4.3 v1
Alternative DVD/ISO Patchers
You might also check out other DVD/ISO patchers. For example, in this forum thread the users EtherealRemnant, pianoman, myzar and wesley are providing an alternative installer (InstallerPatchv3.zip). Also look for Patcher and Kernel extension releases from forum users like macgirl etc.
安装简介（如下说明为单硬盘XP（2K/2K3）和MAC共存安装）：
一、 |
发表于 2021-7-31 20:58:48