2009 ASHRAE 手册-基础 2009 ASHRAE Handbook-Fundamentals SI I-P

游客，本帖隐藏的内容需要积分高于 1 才可浏览，您当前积分为 0

资源信息： 中文名: 2009 ASHRAE 手册-基础 原名: 2009 ASHRAE Handbook-Fundamentals 作者: ASHRAE 版本: SI & I-P 出版社: ASHRAE 书号: 978-1-61583-001-5 发行时间: 2009年 地区: 美国 语言: 英文 概述:

首先声明一下，海报用的图片是2010的，2009的实在找不到了（官网已经把图下了），反正长得差不多:-) 作者/出版者简介：

ASHRAE：American Society of Heating，Refrigerating and Air-Conditioning Engineers, Inc (美国采暖、制冷与空调工程师学会) 点到为止，相关人士一定会清楚这家是干麻的；不知道的请上官方网站自己看，也可以去维基或者XX百科自己找。 官方网站：http://www.ashrae.org 内容简介： 其实以上关于出版者的简介已经足够了，研究暖通空调的、制冷的、建环的、能源的估计很清楚这本书是干麻的。 一句话简介：该手册包含了简明、完全、权威的HVAC&R主题的处理方法。 该知道的都知道，ASHRAE Handbook内容四年一个周期，交替出版。最近的一个周期是：2010 Refrigeration，2009 Fundamentals，2008 HVAC Systems and Equipment，2007 HVAC Applications。这本是2009年的！ 官方描述 The 2009 ASHRAE Handbook—Fundamentals covers basic principles and data used in the HVAC&R industry. The ASHRAE Technical Committees that prepare these chapters strive not only to provide new information, but also to clarify existing information, delete obsolete materials, and reorganize chapters to make the Handbook more understandable and easier to use. An accompanying CD-ROM contains all the volume’s chapters in both I-P and SI units. This edition includes a new chapter (35), Sustainability, which defines this concept for HVAC&R and describes the principles, design considerations, and detailed evaluations needed in designing sustainable HVAC&R systems. In this volume, chapter order and groupings have been revised for more logical flow and use. Some of the other revisions and additions to the volume are as follows: Chapter 1, Psychrometrics, has new information on the composition of dry air, and revised table data for thermodynamic properties of water and moist air. Chapter 6, Mass Transfer, has added examples on evaluating diffusion coefficients, and on heat transfer and moisture removal rates. Chapter 7, Fundamentals of Control, includes new content on dampers, adaptive control, direct digital control (DDC) system architecture and specifications, and wireless control. Chapter 9, Thermal Comfort, has a new section on thermal comfort and task performance, based on multiple new studies done in laboratory and office environments. Chapter 10, Indoor Environmental Health, was reorganized to describe hazard sources, health effects, exposure standards, and exposure controls. New and updated topics include mold, Legionella, indoor air chemistry, thermal impacts, and water quality standards. Chapter 14, Climatic Design Information, has new climate data for 5564 stations (an increase of 1142 new stations compared to 2005 Fundamentals) on the CD-ROM accompanying this book. A subset of data for selected stations is also included in the printed chapter for convenient access. Chapter 15, Fenestration, has been revised to include new examples of solar heat gain coefficient (SHGC) calculations, and new research results on shading calculations and U-factors for various specialized door types. Chapter 16, Ventilation and Infiltration, has new, detailed examples, updates from ASHRAE Standards 62.1 and 62.2, discussion of relevant LEED® aspects, and new information on airtightness and ventilation rates for commercial buildings. Chapter 18, Nonresidential Cooling and Heating Load Calculations, has been updated to reflect new ASHRAE research results on climate data and on heat gains from office equipment, lighting, and commercial cooking appliances. Chapter 20, Space Air Diffusion, has been completely rewritten to harmonize with related chapters in other volumes, with major sections on fully mixed, partially mixed, stratified, and task/ambient systems and the principles behind their design and operation. Chapter 21, Duct Design, has new data for round and rectangular fittings in agreement with the ASHRAE Duct Fitting Database, as well as new content on duct leakage requirements, spiral duct roughness, and flexible duct pressure loss correction. Chapter 23, Insulation for Mechanical Systems, has added tables from ASHRAE Standard 90.1-2007, and a new section on writing specifications. Chapter 24, Airflow Around Buildings, has added a detailed discussion on computational evaluation of airflow, plus new references including updated versions of design standards and manuals of practice. Chapters 25, 26, and 27 carry new titles, reorganized as chapters on Heat, Air, and Moisture Control Fundamentals, Material Properties, and Examples, respectively, with updated content throughout. Chapter 29, Refrigerants, has new content on stratospheric ozone depletion, global climate change, and global environmental characteristics of refrigerants. Chapter 30, Thermophysical Properties of Refrigerants, has updated data for R-125, R-245fa, R-170, R-290, R-600, and R-600a. Chapter 36, Measurement and Instruments, has revised content on measurement of air velocity, infiltration, airtightness, and outdoor air ventilation, plus new information on particle image velocimetry (PIV) and data acquisition and recording. This volume is published, both as a bound print volume and in electronic format on a CD-ROM, in two editions: one using inch-pound (I-P) units of measurement, the other using the International System of Units (SI). Reader comments are enthusiastically invited. To suggest improvements for a chapter, please comment using the form on the ASHRAE Web site or write to Handbook Editor, ASHRAE, 1791 Tullie Circle, Atlanta, GA 30329, or fax 678-539-2187, or e-mail mowen@ashrae.org. 截图：

其它说明： ★本资源是ASHARE官方出售的CD镜像，包含I-P和SI★ 目录: PRINCIPLES 1. Psychrometrics 2. Thermodynamics and Refrigeration Cycles 3. Fluid Flow 4. Heat Transfer 5. Two-Phase Flow 6. Mass Transfer 7. Fundamentals of Control 8. Sound and Vibration INDOOR ENVIRONMENTAL QUALITY 9. Thermal Comfort 10. Indoor Environmental Health 11. Air Contaminants 12. Odors 13. Indoor Environmental Modeling LOAD AND ENERGY CALCULATIONS 14. Climatic Design Information 15. Fenestration 16. Ventilation and Infiltration 17. Residential Cooling and Heating Load Calculations 18. Nonresidential Cooling and Heating Load Calculations 19. Energy Estimating and Modeling Methods HVAC DESIGN 20. Space Air Diffusion 21. Duct Design 22. Pipe Sizing 23. Insulation for Mechanical Systems 24. Airflow Around Buildings BUILDING ENVELOPE 25. Heat, Air, and Moisture Control in Building Assemblies—Fundamentals 26. Heat, Air, and Moisture Control in Building Assemblies—Material Properties 27. Heat, Air, and Moisture Control in Insulated Assemblies—Examples MATERIALS 28. Combustion and Fuels 29. Refrigerants 30. Thermophysical Properties of Refrigerants 31. Physical Properties of Secondary Coolants (Brines) 32. Sorbents and Desiccants 33. Physical Properties of Materials GENERAL 34. Energy Resources 35. Sustainability 36. Measurement and Instruments 37. Abbreviations and Symbols 38. Units and Conversions 39. Codes and Standards